The numerous varieties of candle making molds accessible to buy for home candle creating are practically as numerous as the candles you can get. It is reasonable to picture that with a well-liked interest such as candle making along with the considerable amount of people receiving candles to use at home, that there would be loads of distinctive varieties of candle making molds to buy.
Essentially candle molds are basically containers used to hold poured candle making wax as it cools. As soon as the wax has cooled completely it will maintain the molds shape and can be gently removed.
Candle molds are manufactured from a range of materials and come in various shapes and sizes. All these variations allow them to offer a choice of distinct uses, aluminium molds for example are a well-liked variety of mold that candle makers use as they are very robust and heat resistant. They also have the advantage of giving the completed candle a smooth finish as they don't leave any seams, this provides the look that the candle has been professionally made.
These varieties of metallic molds are regularly used in making pillar and votive candles. When compared with rubber molds though, they are fairly inexpensive and are also very simple to clean. Place them upside down on an oven baking sheet then heat the oven to about 150 degrees, this enables any extra wax to melt and run from the mold and onto the baking sheet. But a weakness of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another disadvantage is that to extract the completed candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are extremely flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and unfortunately can have a strong odour that may pollute your candle. Once more a releasing agent maybe required to aid withdrawing the candle from the mold. Taper and pillar candles are usually made from polyurethane molds. Silicone molds, due to their superior qualities are probably the most costly they are pliable and are able to stretch to a point, making it a lot less difficult to withdraw the candle from the mold without the use of a releasing agent.
The use of latex molds appears to be losing its popularity lately because of the developments and advancements being made with the other varieties of rubber molds. In spite of this, the use of latex has the distinct advantage of allowing you to form your very own stunning mold designs. Using liquid latex it is possible; as a result of painting repeated layers of the latex on an object you can craft an endless quantity of exclusive molds.
The most economical type of mold is manufactured of plastic since it can be very easily mass produced, but because they tend to be brittle they can have a short lifespan. Having said that, you will discover plastic molds are pretty easy to clean with a little hot soapy water. Be in no doubt the mold is perfectly dry prior to using it again as water bubble marks might appear on the surface of the candles. They are brilliant for learners to use because of their availability and low cost, but as you advance in your hobby the other sorts of mold mentioned will offer your candle making more of a trained edge.
Candles Pictures
Author Resource:
If you would enjoy any extra general information on how to choose the best candle making molds or if you would like additional tips on candle making then please call in at my web site www.swankeecandles.blogspot.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")