The different styles of candle making molds accessible to buy for home candle making are practically as numerous as the candles you can get. It is reasonable to picture that with a well-liked hobby such as candle making along with the considerable amount of people receiving candles to use at home, that there would be loads of distinctive kinds of candle making molds to buy.
Essentially candle molds are just containers used to hold poured candle making wax as it cools. After the wax has cooled entirely it will keep the molds form and can be warily removed.
Candle molds are made from a range of materials and come in different shapes and dimensions. All these variations allow them to present a range of different uses, aluminium molds for instance are a common kind of mold that candle makers use because they are very sturdy and heat resistant. They also have the advantage of giving the completed candle a smooth finish as they do not leave any seams, this offers the look that the candle has been professionally made.
These kinds of metallic molds are generally used in creating pillar and votive candles. When compared with rubber molds though, they are somewhat inexpensive and are also very straightforward to clean. Put them upside down on an oven baking sheet then heat the oven to about 150 degrees, this will allow any extra wax to melt and run from the mold and onto the baking sheet. However a disadvantage of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another disadvantage is that to extract the completed candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are especially flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and unfortunately can have a strong odour that may spoil your candle. Once more a releasing agent maybe required to help withdrawing the candle from the mold. Taper and pillar candles are generally made from polyurethane molds. Silicone molds, due to their exceptional qualities are doubtless the most costly they are flexible and are able to stretch to a point, making it a lot simpler to extract the candle from the mold without the use of a releasing agent.
The use of latex molds appears to be losing its reputation lately because of the developments and advancements being created with the other kinds of rubber molds. In spite of this, the use of latex has the distinct advantage of enabling you to create your own beautiful mold designs. Using liquid latex it is possible; as a result of painting repeated layers of the latex on an object you can make an endless quantity of exclusive molds.
The most economical type of mold is manufactured of plastic because it can be very simply mass produced, but because they tend to be brittle they can have a short lifespan. Having said that, you will find plastic molds are quite straightforward to clean with a little hot soapy water. Make certain the mold is thoroughly dry prior to using it another time as water bubble marks possibly will develop on the surface of the candles. They are outstanding for learners to use because of their availability and low cost, but as you advance in your hobby the additional types of mold outlined will grant your candle making more of a specialized edge.
Candles Pictures
Author Resource:
If you would enjoy any additional general tips on how to choose the best candle making molds or if you would prefer additional suggestions on then please call in at my web site candles.blogbrush.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")