The primary reason as to why people paint their interior walls is to brighten up the design of the room. A fresh paint job can give new life into a dull room. To acquire a smooth finish you will need to first take the time to prime the walls. People like to chop corners to save lots of time and money, but doing this could make your work look terrible.
Follow these steps for a smooth application:
The very first step is to make use of a paint scraper to remove all the old chipped paint. Scrape as much of the old paint off as you possibly can. Sand the chipped areas with a bit of sandpaper wrapped around a sanding block. Aim to smooth the edges as much as possible so as not to be noticeable under the fresh paint.
Wipe down the areas to be painted. Wash walls and woodwork to get rid of dust and grease from the surfaces. Grease will keep the paint from adhering to the surface properly and dirt or dust will attach itself to the freshly painted wall. Wash with a mild soap and water solution and allow the area to dry before prepping.
Tape off the areas you do not want painted like baseboards and mouldings. Cover lighting fixtures and wall sockets, and put plastic sheets over furnishings to protect from drips. You will probably also choose to put plastic or an old sheet down on the carpet in the spot you are painting. Paint rollers will sometimes slip and hit where you don’t want them to.
Fill in any holes or cracks with putty and smooth out. Also fill in any holes left from where you scraped the old paint. If there’s the smallest amount of an impression in the wall it will show through the paint as an uneven spot so make sure you fill it as well. When you’ve filled in all the areas, smooth the puttied areas using a damp sponge and let it dry. When dry, sand the area with the sanding block to smooth out any rough edges left.
Choose a top quality brand name of paint. You do not have to spend a fortune on a gallon of paint, but you should buy a high quality product. Call around to some general contractors close to you and ask them what brand of paint they recommend. Once you've gotten a name you'll be able to call or visit some home improvement stores to check and compare prices. This is an important step because if you decide on a cheaper brand of paint it may well not cover as the area as well. Using a primer is definitely an option, but it is not vital. A quality brand of paint should cover in one coat. Sometimes you might need a second coat to provide a more polished look.
A final tip: After your new paint has dried, check if there are any bubbled or uneven spots. In the event you see bubbles, lightly scrape the top, fill and retouch. You can get a small pot of the same colour paint for touch ups. If you aren’t really a do-it-yourself type, or you do not have the time for such a project you can hire a professional to do the job for you.
Author Resource:
Interior painting is difficult work and by doing it yourself you may or may not pull off the results that you’ve been expecting. If you are going to paint the outside of your property then check out painter london first. There's a lot of arranging to do, so you really have to plan it carefully, otherwise you will finish up wasting the paint you will have bought.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")