The assorted types of candle making molds available to purchase for home candle creating are virtually as countless as the candles you can get. It is logical to imagine that with a well-liked passion such as candle making along with the large amount of people receiving candles to use at home, that there would be lots of different kinds of candle making molds to buy.
Essentially candle molds are only containers used to hold poured candle making wax as it cools. Once the wax has cooled completely it will keep the molds shape and can be gently removed.
Candle molds are made from a choice of materials and come in different shapes and sizes. All these variations allow them to offer a variety of individual uses, aluminium molds for example are a widespread variety of mold that candle makers use as they are very strong and heat resistant. They also have the benefit of giving the finished candle a smooth finish since they do not leave any seams, this gives the look that the candle has been professionally made.
These kinds of metallic molds are usually used in creating pillar and votive candles. When compared with rubber molds though, they are relatively inexpensive and are also very easy to clean. Place them upside down on an oven baking sheet next heat the oven to approximately 150 degrees, this lets any extra wax to melt and run from the mold and onto the baking sheet. But a weakness of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another drawback is that to remove the finished candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are very flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and regrettably can have a strong odour that may spoil your candle. Again a releasing agent maybe necessary to aid withdrawing the candle from the mold. Taper and pillar candles are generally made from polyurethane molds. Silicone molds, due to their outstanding qualities are doubtless the most costly they are pliant and are able to stretch to a point, making it a lot simpler to extract the candle from the mold without the use of a releasing agent.
The use of latex molds seems to be losing its attraction lately because of the developments and advancements being created with the other varieties of rubber molds. Then again, the use of latex has the distinct benefit of permitting you to make your very own beautiful mold designs. Using liquid latex it is possible; by painting repeated layers of the latex on an object you can craft an endless amount of unique molds.
The most economical type of mold is manufactured of plastic as it can be very simply mass produced, on the other hand because they tend to be brittle they can have a short lifespan. Having said that, you will find plastic molds are quite easy to clean with a little hot soapy water. Be in no doubt the mold is entirely dry prior to using it again as water bubble marks may appear on the surface of the candles. They are excellent for novices to use because of their availability and low cost, but as you improve in your hobby the additional forms of mold pointed out will give your candle creating more of a trained edge.
Candles Pictures
Author Resource:
If you would enjoy any further general tips on how to choose the best candle making molds or if you would like further information on then please call in at my web site candles.blogbrush.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")