Sterling silver is pretty but can be emphasized more if it was given a color such as blue, red, or even a light yellow. Fine gold jewelry design ideas, not related to gem stones or beads, exist to create some lovely pieces.
You can add some beautiful colors simply by using a certain material if you know what it is.
You have to mix first the glue with a tick and the low-tech materials could be used in work. By using these materials you can get great results.
Epoxy is the finished product of a 2 part mixture of resin and hardener. To allow the substance to become glossy and hard, wait after you mix it for a few minutes. Once it is hardened you will be able to sand, drill, or even glue it. It is similar to fifty polished coats and could make a mirror finish.
So just when do you add in the enhancing color? Here it goes. You can permeate the color by using different materials like makeup powder jello kool-aid or ordinary paint. Let your imagination do the works.
Layers will also work here. One method which you could try is to impress or even drip it into a copper or sterling sheet section. Another method that enhances creativity is dipping. Since Epoxy is a type of glue, be certain not to let the item touch anything else or it may get stuck in the process. You can prevent this sticking together by hanging or holding the item until it dries.
In any hardware store you will be able to purchase epoxy in two parts as well. Also look for it in most hobby and craft shops. Epoxy is most often conveniently distributed in syringes and bottles. You can also buy it in large quantities if you want more than this.
But before you try using epoxy on your expensive gold jewelry, you must understand the basics about the process. This thing is fast and ready for use in 11 and 5 minute time frames. There is an array of choices for this but these two are the most common. Once you have mixed up the amount of material you think you will need, work with it in the specified time range because you cannot use the leftover product again. A good place to use the chemical is provided by a disposable paper plate or bowl, or a piece of scrap paper. Do not try eating it too.
What do you suppose the second material we will discuss will be? Try guessing this one. To give you some hints, it comes in several colors, is made from a combination of liquid and solid, it can be mixed and molded, and it is an ordinary material.
If you guessed polymer clay, then you are correct. It is composed of something called polyvinyl chloride and is marketed under a variety of names such as Sculpey and Friendly Clay. What's odd about it is that there is really no clay in its content.
Polymer clay has a variety of uses. If you like doing mosaics you can use it by sticking the little pieces on metal sheets. Sterling tubing can be used and filled with clay to create unique pieces. And there is no end to the ways you can use liquid clays and powders in artistic designs and the creation of stunning jewelry.
Of course, before working with polymer clay, you need to know a few things about it. Polymer clays may vary with each other since manufacturers may make it differently with each other. The clay needs to be kneaded with your hands before it can be used. You can also put some in a baggie and sit on top of it, using your creative side so to speak. Make sure that you will only use the clay with the thing that requires of it. Be sure and preserve it.
Ensure safety when you work with any of these materials. There are precautions to be taken including not to melt it, inhale it, or glue anything in a manner it shouldn't be glued. When you're designing let your creative juices flow and don't be afraid to try different things. With these great new ideas for fine gold jewelry designs, you will be thrilled with all the beautiful items you can produce.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")