Pole vault functions like this: The pole vaulters race the length of the runway lugging a long thin, versatile rod and subsequently stand the end of that fiberglass rod into an indented metal pit box, causing the athlete to swing up into the air in an try to clear a bar - as in high jump.
Pole vault is a solo exclusion pursuit. Nonetheless prior to the method of elimination starting a qualification round is held to ascertain the very best twelve contestants, who will advance toward the finals. Ahead with the prerequisite bout beginning, a mandatory qualification bar height is established - all contestants who can, clear this bar height inevitably advances, and they want not jump again as they automatically qualify.
Each and every athlete can decide on what height they would like to enter the competition. After they enter, they have 3 attempts to clear the height. If a height is cleared, the vaulter advances to the next height, exactly where they're going to have three much more attempts. As soon as the vaulter has three consecutive misses, they may be out of the competition plus the highest height they cleared is their result.
Entrants can determine to pull out at any time, prior to or through a round. Entrants fail and are eliminated soon after not clearing a height from three attempts. The bar in pole vault is raised five cm each and every time till there is certainly either a winner or neither competitor can make it.
If neither entrant clears the bar, the winner is decided by countback - two countback requirements are - 1, winner will be the competitor who clears the bar within the least variety of attempts - two, winner could be the jumper who missed the least attempts.
Should this not separate the competitors - a jump off is known as for - This is performed by beginning the bar height in the last cleared height. If each clear the bar then it can be taken up, if nobody clears, the bar it is lowered.
Safety is often a big concern for the pole vault and in the 2003 season an important rule change happened, which did enhance the minimum size of the pole vault pits for school and high schools, pole vault are now needed to have padding about the vault box to prevent the back region from vulnerability. For high schools the minimum needs are: 19'8"w (back), 16'5"w (front) x 20'5" length x 26" height. Front units ought to extend 4' forward from base units and also a popular leading pad shall cover the complete pit. As for college, minimum size is 19'8"w x 22'5"l x 32"h with 16'5" padding behind the plant box. The front portion of the pit must be the same width because the back and will need to extend 6' toward the runway from the base sections. A typical cover must conceal the entire pit and hold the lot collectively to quit entrants falling between the sections of the pit and getting hurt.
Author Resource:
Apart from pole vault becoming an thrilling competitor sport it's also an exceptional spectator sport and up there with gymnastics and ice figure skating for it's appeal to the crowd. You'll discover a lot more facts on pole vault pits and gear here http://polevaultpits.com/.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")