Whilst a person's air-conditioning system is properly maintained, you can save lots of money from your gas and electrical power invoice. When you follow the four rather simple secrets and techniques below, you'll certainly be soon on your way to ensure that you start saving funds right now!
1) Get your system serviced regularly. Getting your system serviced every 12-24 months is essential to keep your system operating at its optimum potential. An expert serviceman will check crucial parts associated with the system to be able to make sure that it is working properly. A standard service would normally include cleaning of filter systems, reviewing of airflows, checking that all fittings are protected and guarantee the system is working effectively.
2) Wash your return air filters consistently. Every ducted heating systems & reverse cycle systems should have a return air grill set up in a choice of the ceiling or at low level on a wall. If the grill provides a filter inside it, make sure that the filter is cleaned out every 4-6 weeks using a hoover. Airborne debris builds on this filtration system very quickly and it can affect the functionality of your air-conditioning system, particularly if there are tobacco users within your household! In the event the filter is damaged, ensure that you bring it into your nearby air-conditioning expert to get it upgraded for a small charge.
3) When you know that it must be usually a warm day, Pre-Cool the house for energy savings. When there is a warm day estimateed, it's always recommended to pre-cool the home before the heat starts to increase. If you have a programmable timer on the air-conditioning system, set it for a couple hours after you go to sleep, on a temperature of about 24 ?C. That should ensure that once you awaken in the morning your home is going to be nice and cool, and you will lower the temperature as needed as the day gets hotter. This prevents the machine from operating at 100% total capacity trying to get the home from 35 degrees down to 24 degrees, which unfortunately uses more electric power! This is especially practical for those who have an inverter system.
4) The speed setting of '100%' isn't always a good thing! Should your controller incorporates a fan speed (eg. an Evaporative Cooling System), setting this controller to 100% will not be always a comfortable setting. It's not possible to set a temperature on an evaporative air conditioning like you can on ducted heating or reverse cycle, only a 'fan speed'. If you have a higher fan speed set on the controller, the environment isn't going to be colder; it just indicates that there'll be a greater volume of air passing through the dwelling. An advised setting on these kinds of systems is just about 60%-70% of the maximum speed. This would supply cool air at a cozy rate.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")