Setting up a Linksys Wifi Router needn't be a challenging challenge, particularly with the modern Linksys router models being easier to installation than before. With that in mind if you're keep up with this informative guide you will possess your wifi network set up almost immediately!
At begin let's take a look at the back of your router. Although the several models will be there are most of the subsequent ports:
-Electrical power port in which the power lead goes into
-WAN port, much more about that below.
-Ethernet Ports, most commonly 4 of those working at 10/100 or 1GB.
-USB port for connecting in mass storage device (optional)
The WAN port would probably vary dependent upon what product you have but will possibly be an Ethernet port or perhaps DSL port. Many individuals will make use of cable and so provide the model with all the DSL port. If you happen to live in a space that provides the other type of cable using Coaxial you then could have a model including a WAN Ethernet port.
You would want to be the router powered up 1st and therefore plug in the WAN port. In case you're on Digital subscriber line you'll require to plug in a micro filter on your telephone socket then an rj11 cable over the micro filter on to the DSL port. To set up the router you can go through steps inside the setup Compact disc or do it now manually.
Usually the setup CD are designed to make suggestions through the entire steps and it is also the right way to achieve it. But when you follow you do not have a setup instruct in that case , manual process will be easy enough. Start with plug an Ethernet cord right into the router and therefore the other end of your personal computer. With respect to the router you are usually right away assigned an ip. Check the icon towards the bottom directly to determine if your connected. If you have limited or no connectivity then you will want to put yourself an Ip address.
The default area for Linksys routers is generally 192.168.1.x but read the documentation to make sure. Give yourself an ip address of 192.168.1.50 (You could have to modify that according what the default wide range is). Check out the router configuration webpage, this will be the http:// with the IP address of your router (again, look at the documentation provided).
Over the page you are prepared to configure the wireless network through a name and key which you decide. Basically search for the wi-fi menu. Actually you should get to the 'WAN' or 'Internet' tab and configured the internet connection. You must have to enter the username and password your Internet service provider gives you.
Once you have complied you have to ready to function! Check-out your wireless networks on your laptop and you can get your own listed there, pop the key in and link up and you should have access to the internet!
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")