Measurement of the Window: It measures only the opening of the window in the wall. It from top to bottom takes the measures and from left to right. It takes the smaller measurement. In the factory, we will reduce 1/2 " to each side to obtain the final size of the window. This will guarantee the appropriate space and will allow to realise adjustments. In this point You will have to make a decision: How he is going to place the window, to outer edge, inner edge or in means? Many profiles exist to facilitate and to make this task efficient. Then, envÃenos Contáctenos a drawing of the section or plane of the opening, indicating where it would like to place the window with respect to the frame and how it prefers to place it. We will send by fax drawings to him of different possibilities from installation so that You can choose among them. The same procedure is applied for the position of the doors.
Â
The windows will arrive without the installed handle. It takes the handle and it places it, making sure that it can turn it towards the three positions (closed, turn, to tilt), and soon ajústela with both provided screws. It places the handle in the position abrir or to turn (photo) and while it maintains the window in his position, it takes a screwdriver and it down presses the safety clip in the hinge superior inwards and. This will release to the hinge superior and it will allow him to tilt the window towards You. Soon it raises the window towards outside the hinge inferior, that is tilted. At this moment You are ready to put the frame in the opening. SUGGESTION: It removes all the panels of the window before the installation. This will cause that the installation is safer and easy. Transport great doors and fixed windows with cords for piano
Â
Using a level, it cerciórese that the window is vertical and correctly in picture. If it is necessary, it fits wears between the jamb and the frame. When the window is straight, it screws the left corner superior. Following step: it assures the sides inferior and right superior the window. If it had to fit or to move the window, removes the screw, fits to the window and atornillela again. The screw must be to the evenness with the surface of the frame. Neither too deep nor too salient. The screws of are milled complete, to simplify the process.
Â
Each S glass cloth is located correctly by means of plastic spacers, one in the left corner superior and one in the hinge inferior. If the frame needs to be lowered it will have to clear spacer and to add it to the angle inferior. If the frame needs to be lifted, adds to spacer above and clears one of the angle inferior. It will have to use a handle to make sufficient space to add to spacer. It never uses no metal or another material one it last against the glass! It will break the glass panels! It uses only plastic or wood! SUGGESTION: The espaciadora aluminum bar contains all the possible information about: date of manufacture (guarantee), measured of the glass in mm, level of
Â
security of the glass and type of cover lowE.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")