BSOD or the Blue Screen of Death, (also known as blue screen physical memory dump), is an inaccuracy that occurs on a Windows system - when the notebook just shuts down or repeatedly reboots. This error can come about just as your PC is booting up or some Windows application is running. When the Windows OS discovers an unrecoverable fault it hangs the operating system or leads to memory dumps.
In the blue screen physical memory dump situation there is a whole set of diagnostic information that gets displayed on a blue screen (which is the name). You can dump the PCs memory contents into a dump file and this can be analysed afterward to figure out the root cause for the problem.
Software errors or hardware errors that occur when running Windows and intermittent errors are the general reasons for a blue screen physical memory dump. Up-to-the-minute programs or drivers that have been installed or changes in the registry settings are the typical s/w causes. Intermittent errors refer to failed system memory/ hard disk or over heated processor and these too could cause the blue screen physical memory dump error.
There are a number of solutions for all of the above problems. Before trying them out however, you could try running registry cleaners on your computer. A Windows registry is a catalog of entries about software/ hardware and other system related information that the OS uses. This can get corrupted when the PC has been used for some time. Registry cleaners can clean this register effectively and resolve this issue. If this step fails, you could try out the following:
1. S/w related error handling - If the blue screen physical memory dump happens after the installation of s/w application or a driver it could be that there is system incompatibility. By booting into safe mode and removing the software you can quickly fix this error. You could also try out a "system restore" to revert to an earlier state.
2. H/w related error handling - when hardware causes BSOD installing latest fixes for the hardware and/ or motherboard can help. You can also add new hardware that is compatible with the system.
3. Handling intermittent errors - when there is a message to the effect that "memory or hard disk is malfunctioning", you could put in new hardware to replace the defective part until the real problem is found out. There are h/w diagnostic programs to discover the faulty portions.
Tired of slowing Laptop performance? Do you want to repair physical memory dump in cheap and fast way? You can inspect the registry in your laptop for free and mend them with the best registry cleaner on the market. After scanning and fixing your Computer, you will be surprised how fast your computer is. A good number operating system crashes are caused by registry errors and can be fixed quite effortlessly by registry repair software, however if an error is caused by your hardware device it is likely the device driver in which case a driver update is necessary.
Author Resource:
If you would like a free scan from the number 1 registry repair software then you can get it here at http://www.number1registryfix.info Thanks for reading
Matthew Haskins @ http://www.2kweekly.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")