The skateboard will without a doubt not work properly if it does not have the right skateboard wheels. This is in fact the most essentials part to a skateboard, along with all the other parts such as, trucks, deck and bearings. The skateboard wheels are obviously attached at the bottom of the boards and then they are also attached to the distinctive axles, which are referred to as skateboard trucks.
When you buy your skateboard wheels, you ought to buy them according to your skateboarding needs, for example are the wheels going to be strong enough to stand the hardness and rigidness of your play?
The wheels of the skateboard are more often than not made up of polyurethane, and these are available in diverse level of hardness. The skateboard wheels hardness can be measured by using a durometer, a durometer is a scale.
If the wheels are soft, you will know because it has a low scale at the durometer, and you will also know if the wheels are just as hard as you want them to be through the same method, only vice versa. Through a durometer, just about 100A is the hardest wheel for a skateboard, and for the softest, it is 75A. When it comes to looking for the right wheels for your skateboard, it is not only the hardness of the wheels that you have to take into thought, but also the wheels’ size. For skateboarding at ease, you can buy wheels that are 48mm to 100mm in dimension.
Different Skateboard Wheels for different types of Skateboarding
Street Skateboarding
For the street skateboarding, the wheels are the smallest. These type of wheels for street skateboarding will have a measurement of anywhere in between forty eight to fifty five millimeters. The wheels for street skateboards are hard, and this allows the skateboarder to gain higher speed, and the small sized wheels will make it a lot easier for the skateboarder to perform tricks, such as ollies and flip tricks.
Vert Skateboarding
The wheels that are used for vert are those of course who are into vert skateboarding. This is another kind of skateboarding that will require a lot of rolling and at a high speed, landing on the skateboard ramps and jumping. The wheels that are used for vert are the hardest of all. The size of the vert’s wheel is from fifty five to sixty millimeters. This wheel will allow the skateboarder to skate and be able to maintain high speed before the jump. These types of wheels are exclusively used on the skateboarding ramps.
Slalom Racing
For the slalom racing kind of skateboarding, the wheels that have to be used are those wheels that are up to date. Having a soft but a much better grip is all that is needed when the skateboarder will do some turns. In this kind of skateboarding, the skaters are required to race down a hill, and then the course there will be obstacle cones on the path.
Longboard skate wheels are the last type of wheel for the skateboard. These wheels are mainly used for transport and cruising, and these are the largest.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")