The diverse styles of candle making molds available to purchase for home candle creating are almost as numerous as the candles you can get. It is reasonable to imagine that with a well-liked hobby such as candle making along with the substantial amount of people getting candles to use at home, that there would be plenty of diverse varieties of candle making molds to buy.
Essentially candle molds are merely containers used to hold poured candle making wax as it cools. After the wax has cooled entirely it will maintain the molds appearance and can be gently removed.
Candle molds are made from a choice of materials and come in a variety of shapes and dimensions. All these variations allow them to offer a choice of diverse uses, aluminium molds for example are a common variety of mold that candle makers make use of since they are extremely sturdy and heat resistant. They also have the benefit of giving the completed candle a smooth finish since they don't leave any seams, this gives the look that the candle has been professionally made.
These varieties of metallic molds are regularly used in creating pillar and votive candles. When compared with rubber molds though, they are comparatively inexpensive and are also very straightforward to clean. Put them upside down on an oven baking sheet then heat the oven to about 150 degrees, this allows any surplus wax to melt and run from the mold and onto the baking sheet. But a disadvantage of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another shortcoming is that to remove the completed candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are extremely flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and regrettably can have a strong odour that may pollute your candle. Yet again a releasing agent maybe required to aid withdrawing the candle from the mold. Taper and pillar candles are typically made from polyurethane molds. Silicone molds, due to their superior qualities are almost certainly the most costly they are pliant and are able to stretch to a point, making it a lot easier to remove the candle from the mold without the use of a releasing agent.
The use of latex molds appears to be losing its popularity lately because of the developments and advancements being created with the other kinds of rubber molds. In spite of this, the use of latex has the distinct benefit of permitting you to make your very own stunning mold designs. Using liquid latex it is possible; by means of painting repeated layers of the latex on an object you can form an endless amount of unique molds.
The most inexpensive type of mold is manufactured of plastic as it can be very easily mass produced, but because they tend to be brittle they can have a short lifespan. Having said that, you will find plastic molds are fairly easy to clean with a little hot soapy water. Make sure the mold is perfectly dry before using it yet again as water bubble marks could appear on the surface of the candles. They are outstanding for learners to use because of their availability and low cost, but as you advance in your hobby the additional variations of mold described will offer your candle creating more of a trained edge.
Candles Pictures
Author Resource:
If you would like any new general tips on how to choose the best candle making molds or if you would prefer further information on candle making then please call in at my web site www.swankeecandles.blogspot.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")