The different types of candle making molds available to buy for home candle creating are practically as countless as the candles you can get. It is reasonable to imagine that with a well-liked interest such as candle making along with the considerable amount of people receiving candles to use at home, that there would be plenty of distinctive kinds of candle making molds to buy.
Essentially candle molds are just containers used to hold poured candle making wax as it cools. Once the wax has cooled completely it will keep the molds appearance and can be warily removed.
Candle molds are made from a choice of materials and come in a range of shapes and dimensions. All these variations allow them to present a range of distinctive uses, aluminium molds for example are a common kind of mold that candle makers make use of because they are especially durable and heat resistant. They also have the benefit of giving the completed candle a smooth finish as they don't leave any seams, this provides the appearance that the candle has been professionally made.
These kinds of metallic molds are generally used in creating pillar and votive candles. When compared with rubber molds though, they are relatively inexpensive and are also very effortless to clean. Put them upside down on an oven baking sheet next heat the oven to approximately 150 degrees, this will allow any surplus wax to melt and run from the mold and onto the baking sheet. But a drawback of aluminium molds is their rigid inflexibility they present little choice in varying the shapes and textures of candles. Another shortcoming is that to remove the finished candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are especially flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and regrettably can have a strong odour that may pollute your candle. Yet again a releasing agent maybe necessary to aid withdrawing the candle from the mold. Taper and pillar candles are regularly created from polyurethane molds. Silicone molds, due to their excellent qualities are doubtless the most costly they are pliable and are able to stretch to a point, making it a lot simpler to withdraw the candle from the mold without the use of a releasing agent.
The use of latex molds appears to be losing its attraction lately because of the developments and advancements being created with the other kinds of rubber molds. In spite of this, the use of latex has the distinct advantage of allowing you to create your own beautiful mold designs. Using liquid latex it is possible; by means of painting repeated layers of the latex on an object you can create an endless amount of unique molds.
The most reasonably priced type of mold is manufactured of plastic because it can be very easily mass produced, though because they tend to be brittle they can have a short lifespan. Having said that, you will find plastic molds are quite straightforward to clean with a little hot soapy water. Be in no doubt the mold is completely dry before using it over again as water bubble marks could appear on the surface of the candles. They are outstanding for novices to use because of their availability and low cost, but as you advance in your hobby the other different types of mold outlined will offer your candle creating more of a trained edge.
Candles Pictures
Author Resource:
If you would enjoy any additional general information on how to choose the best candle making molds or if you would like further guidelines on candle making then please call in at my web site www.swankeecandles.blogspot.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")