The different kinds of candle making molds accessible to buy for home candle creating are practically as numerous as the candles you can get. It is reasonable to picture that with a well-liked activity such as candle making along with the huge amount of people receiving candles to use at home, that there would be lots of distinctive varieties of candle making molds to buy.
Essentially candle molds are simply containers used to hold poured candle making wax as it cools. As soon as the wax has cooled completely it will keep the molds form and can be carefully removed.
Candle molds are manufactured from a variety of materials and come in different shapes and sizes. All these variations allow them to present a variety of individual uses, aluminium molds for example are a widespread type of mold that candle makers use as they are very robust and heat resistant. They also have the advantage of giving the finished candle a smooth finish since they don't leave any seams, this provides the appearance that the candle has been professionally made.
These varieties of metallic molds are generally used in making pillar and votive candles. When compared with rubber molds though, they are fairly inexpensive and are also very straightforward to clean. Place them upside down on an oven baking sheet next heat the oven to just about 150 degrees, this will allow any extra wax to melt and run from the mold and onto the baking sheet. Then again a drawback of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another weakness is that to extract the completed candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are especially flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and regrettably can have a strong odour that may taint your candle. Once more a releasing agent maybe required to aid withdrawing the candle from the mold. Taper and pillar candles are generally made from polyurethane molds. Silicone molds, owing to their superior qualities are doubtless the most expensive; they are pliable and are able to stretch to a point, making it a lot less difficult to remove the candle from the mold without the use of a releasing agent.
The use of latex molds looks to be losing its attraction lately because of the developments and advancements being made with the other kinds of rubber molds. In spite of this, the use of latex has the distinct advantage of enabling you to form your own beautiful mold designs. Using liquid latex it is possible; by painting repeated layers of the latex on an object you can craft an endless amount of exclusive molds.
The most economical type of mold is manufactured of plastic because it can be very simply mass produced, on the other hand because they tend to be brittle they can have a short lifespan. Having said that, you will find plastic molds are fairly straightforward to clean with a little hot soapy water. Make certain the mold is thoroughly dry prior to using it yet again as water bubble marks may materialize on the surface of the candles. They are excellent for novices to use because of their availability and low cost, but as you improve in your hobby the other kinds of mold outlined will offer your candle making more of a specialized edge.
Candles Pictures
Author Resource:
If you would like any extra general guidelines on how to choose the best candle making molds or if you would prefer further tips on candle making then please call in at my web site www.swankeecandles.blogspot.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")