The different varieties of candle making molds accessible to purchase for home candle making are practically as countless as the candles you can get. It is reasonable to imagine that with a well-liked passion such as candle making along with the substantial amount of people getting candles to use at home, that there would be loads of different kinds of candle making molds to buy.
Essentially candle molds are simply containers used to hold poured candle making wax as it cools. When the wax has cooled entirely it will keep the molds shape and can be carefully removed.
Candle molds are manufactured from a choice of materials and come in numerous shapes and sizes. All these variations allow them to present a range of distinctive uses, aluminium molds for instance are a popular sort of mold that candle makers make use of since they are especially sturdy and heat resistant. They also have the advantage of giving the finished candle a smooth finish as they do not leave any seams, this gives the look that the candle has been professionally made.
These varieties of metallic molds are generally used in making pillar and votive candles. When compared with rubber molds though, they are fairly inexpensive and are also very easy to clean. Position them upside down on an oven baking sheet then heat the oven to approximately 150 degrees, this lets any surplus wax to melt and run from the mold and onto the baking sheet. Then again a weakness of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another weakness is that to withdraw the completed candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are extremely flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and unfortunately can have a strong odour that may spoil your candle. Yet again a releasing agent maybe necessary to help withdrawing the candle from the mold. Taper and pillar candles are usually created from polyurethane molds. Silicone molds, due to their exceptional qualities are probably the most expensive; they are flexible and are able to stretch to a point, making it a lot simplier and easier to remove the candle from the mold without the use of a releasing agent.
The use of latex molds seems to be losing its popularity lately because of the developments and advancements being made with the other kinds of rubber molds. Then again, the use of latex has the distinct benefit of allowing you to create your very own beautiful mold designs. Using liquid latex it is possible; by means of painting repeated layers of the latex on an object you can form an endless quantity of unique molds.
The most economical type of mold is made of plastic as it can be very simply mass produced, on the other hand because they tend to be brittle they can have a short lifespan. Having said that, you will discover plastic molds are fairly easy to clean with a little hot soapy water. Make certain the mold is totally dry prior to using it once more as water bubble marks can appear on the surface of the candles. They are brilliant for novices to use because of their availability and low cost, but as you develop in your hobby the additional variations of mold described will present your candle creating more of a practiced edge.
Candles Pictures
Author Resource:
If you would enjoy any further general tips on how to choose the best candle making molds or if you would prefer further information on then please call in at my web site candles.blogbrush.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")