SafeOne? personal RF safety monitors are a good and economical means to monitor the strength of electromagnetic (RF) fields from mobile phone towers, microwave ovens, radio and tv installations, high frequency welders, and different common workplace RF sources between ten and ten,000 MHz. The Personal RF Monitor is important RF safety equipment in complying with FCC, OSHA, and alternative workplace rf safety requirements.
SafeOne? personal RF safety monitors provide you audio and visual warning when the IEEE and ICNIRP limit is exceeded on your body. It immediately alerts you to high frequency radia?tion fields that would be a health hazard. SafeOne? offers an approximate price of RF strength to assist you determine how long you can stay within the radiation field.
Very convenient to wear and use, the SafeOne? personal RF safety monitor is the scale of a telephone and weighs below 3 ounces! It's smaller and much lighter than competing units!
Using Your SafeOne? Personal RF Monitor
Wearing Your Monitor
The SafeOne? personal RF monitor should be worn on the belt with the supplied belt clip, or clipped to a harness within the included carry pouch. Position the Personal Monitor further from metallic objects, such as a tool pouch. The SafeOne? personal RF monitor should not be used with an RF protecting suit.
Preparation for Use
To begin using SafeOne? personal RF protection, simply unscrew the battery cowl on the rear and insert two triple-A alkaline batteries, perform a functional test, and set desired alarm parameters.
No want to stress regarding the batteries - the SafeOne? pocket RF monitor's batteries will last over five hundred days!
The monitor incorporates a self-check operate to be used whenever the monitor is turned on.
Deciphering Your Monitor
The SafeOne? personal RF monitor uses a easy set of audible and visual alarms to warn you to dangerous radio frequency (RF) fields. Those alarms will be set for your convenience.
When SafeOne? RF radiation monitors provide an alarm, it means that that your RF exposure could be higher than FCC, OSHA, or ICNIRP limits. When this occurs, you should leave the area and proceed in accordance together with your company's RF safety plan or consult the acceptable workplace authority.
Setting Alarm / Operate Features
SafeOne? has a pair of alarm levels and 3 alarm functions. All functions are controlled by pressing the SELECT pushbutton. When SELECT is pushed there's audio and visual feedback.
The World Health Organization has established health hazard limits that are accepted in most components of the planet as standards. In the United States, these are standards of the FCC and OSHA. The radiofrequency exposure, Maximum Permissable Exposure (MPE) limits are divided into 2 levels, one for "General Public" use and one for persons trained to figure in high frequency radiation areas, known as "Occupational".
Your RF monitor can be set to these 2 alarm levels. The lower "Public" level is automatically chosen when SafeOne? personal RF protection is turned on. To choose "Occupational", press and hold the SELECT pushbutton for additional than 5 seconds. The unit will respond with 10 long or ten short beeps. The chosen level is indicated by a lighted bar.
Author Resource:
Jeff Patterson has been writing articles online for nearly 2 years now. Not only does this author specialize in Personal Training, you can also check out his latest website about
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")