When you would really like to create curtains for the house but do not know one end of a sewing machine from yet another then don't be concerned - there is a way! A way where you do not have to even do as much as pick up a needle and thread. There are plenty of reasons why you might like to make your own curtains. Possibly you might have witnessed some incredible material however it isn't out there in ready created curtains. Perhaps your windows really are a non regular dimensions plus the cost of customized curtains is as well much. Possibly you simply feel like becoming inventive.
Whatever your reasons you can actually very easily make very simple curtains in an afternoon and then embellish them to your hearts content with or with out a sewing machine or acquiring to sew them by painstakingly by hand. Also as your material, you are going to need to have a steam iron and iron on double sided fabric tape which functions being a material glue holding seams together. You may have to be in a position to press the fabric using your iron so verify the fabric is suitable for this.
1. Measure and Reduce
To make 1 curtain panel (for any pair of curtains), measure your windows and reduce a piece of fabric which is the width of your window plus four inches as well as the length (or drop) of your curtains plus about 10 inches. Remember to measure from where your curtain rod is fixed when measuring the duration you call for.
2. Neaten the sides
Fold within the two sides for the curtains by 1 inch towards the wrong side of the material and press after which fold in one more inch and press again. Make sure the seams are straight then, following the directions on the fabric tape, use this to fix the seams neatly in place.
3. Produce the Casement Header
The seam in the leading needs to become an open channel that will allow the curtain rod or pole to pass by means of effortlessly so this can depend around the size of your curtain rod. If the diameter of your curtain rod is one inch create a three inch channel. Do that by folding the leading of your curtain underneath one inch and pressing utilizing the material tape to repair this neat edge after which creating the three inch channel by folding inside an additional 3 inches around the incorrect facet on the curtain and repairing the fabric tape along the lowest edge with the seam.
4. Hang the Curtains
Hang the curtain around the rod and mark the correct level for your bottom in the curtains.
5. Finish Off the Curtains
Trim the curtain if needed if there is as well much material to produce a neat hem along the bottom edge. Make the bottom seam by folding in 1 inch to neaten the edge and repairing this with the iron on material tape then fold within the remaining excess fabric and resolve with all the tape to produce a curtain panel of the right length.
Be aware that if you are making a pair of curtains adhere to these actions for every curtain together so that you match seam allowances and duration and so on.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")