If you know how to install an internal hard drive. This is a very similar process, all you have to do is slide it in and screw it in place and the plug in a couple cables, though this will be easier said than done. You going to start off by removing your computer's case, you can look up how to do this in various locations on the Internet, now you're going to remove the old drive if you have one, you going to do this by unplugging its power and data, and then sliding it out of the front of your computer's case. If you're installing an S ATA drive, you're going to attach the rails to DVD drive. If your case uses them. Now you going to slide the new DVD drive into the front of your computer. For this you need an unoccupied drive bay. It may be necessary for you to pry out a plastic cover from the front of your computer before you can slide the drive in. Then you're going to plug-in the drive's power and data cables. The data cable plugs into the motherboard, while the power cable plugs into the metal box in the corner, the plug only go in one way, so make sure you don't force anything. Now you're going to replace their computers cover, plug it in and turn it on, and Windows should recognize the new DVD drive.
Author Resource:
I have just recently started writing articles, so my grammar and punctuation may be a little bit off, but I try to make sure I know what I'm talking about when I write my article, I have also just started to make websites, my latest one is about cheap pro skateboards , and it includes similar pages about things like cheap skateboard trucks
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")