When you could jack your car up to change a tire, it could not always be underneath supreme conditions. No matter whether or not you're on the side of a highway or within the relative comfort of your own storage, the process of lifting a car weighing hundreds of kilos entails some risk. By following just a few easy procedures, you can reduce any hazards to your self and your vehicle.
Know Your Jack
Most autos come geared up with a small scissor jack. This jack will likely be useful sufficient for an emergency tire-change on the roadside. Before you're in an emergency scenario, familiarize your self together with your specific jack and how it works.
Secure the Area
When potential, ensure that automobile is parked on a level surface. Make it possible for the automobile is secure. The emergency brake needs to be firmly set. Vehicles with automatic transmissions ought to be in "park," while ones with handbook transmissions needs to be left in gear. Wedge bricks or blocks to the back and front of the tire on a diagonal from the tire to be lifted.
Decide Your Battleground
Determine an appropriate place to set the jack. A standard novice mistake is to set the jack under a bumper or body panel. These areas aren't designed to carry the burden of the entire automotive; they can break below the strain and permit the automobile to fall. The jack must go below the vehicle's frame, otherwise referred to as the chassis. Most cars are designed with a selected location for jack placement. When in doubt, verify your proprietor's manual.
Preserve it Steady
Guantee that the jack is positioned on a secure, even surface. If the bottom is rough or coated with gravel, place a broad, sturdy board beneath the jack. That is particularly essential with small, factory-supplied tire jacks, which can very have slender bases.
Proceed with Warning
Crank the jack up slowly. Though you may be in a rush, take your time. Be careful to not have any a part of your physique beneath the automobile, so as not to be injured if the car ought to fall. Once the car is lifted sufficient for the tire to clear the bottom, push on it a bit to confirm its stability on the jack.
Decrease the Automobile
Now that the tire has been changed, bring the automobile back down simply as you jacked it up: slowly and with care. As soon as again, no a part of your physique (or anybody else's) ought to be beneath the vehicle. If there are other people current or helping, have them step back away from the automotive and out of the way. Finally, take away the blocks from the chocked wheel.
By working at an even pace and utilizing widespread sense, it is best to have the ability to elevate a car, change its tire, and lower it once more safely. Remember the fact that these instructions solely apply to lift an automotive to alter a tire, to not any form of repair work that requires you to get beneath the automotive; for that, further precautions will be necessary.
Author Resource:
If you want additional info with regard to effective wasp traps pay a visit to the author's internet site immediately.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")