Is it smart to use flood vents?

Copyright (c) 2009 William Sykes

Yes it is Smart to Use Flood Vents!

Properly positioned and installed flood vents in your home's foundation walls will not only help you protect your investment, they can help you save money. And, despite what you may have heard, the regulations governing their type and placement are easy to understand.

These regulations were stipulated by the National Flood Insurance Program (NFIP), a program of the Federal Emergency Management Agency (FEMA).

Requirements: the Basics

1 - Openings must be installed in foundation walls so that water can flow, unimpeded, in and out of the crawl space without damaging the walls' integrity. The regulation is easy to remember: one square inch of opening in the foundation wall for every square foot of the area of your house. For example, a 2,000-square-foot crawl space would need 2,000 square inches of opening. The number of flood vents you need to install depends on the size and type of vent you buy. (More on that later.) 2 - Each enclosed area must have a minimum of two openings. If there are multiple enclosed areas within the foundation walls, each area must have at least two openings in its exterior walls.

3 - Flood vents must be below flood level to work. The bottom of each opening must be no more than 1 foot above whichever of these is higher: the interior or exterior grade immediately under the opening.

4 - Any screens, grates, grilles, fixed louvers, or other covers or devices you install must not block or hinder the automatic flow of floodwaters into and out of the enclosed area.

The purpose of flood vents (also called "flood gates" or "flood ports") is to reduce structural damage from flooding. These permanent openings accomplish this objective by allowing water to pass into or out of a building's exterior foundation walls.

In a flood situation, if the water pressure inside and outside your home can't equalize rapidly enough, the windows and doors could blow out. In addition, this pressure can compromise the foundation and make your home unsafe to live in. Studies have shown that houses with proper openings survive a flood; homes without such openings collapse.

According to its website, the NFIP "requires flood vents for residential basements, crawl spaces, garages, and other enclosed structures that are below the Base Flood Elevation (BFE) in Special Flood Hazard Areas." BFE is the height of the base flood, usually in feet, in relation to the National Geodetic Vertical Datum of 1929 or other datum as specified.

When a Community participates in the NFIP every property owner in the community must follow all of the code requirements whether or not the property owner purchases flood insurance. One of the code requirements is properly installed flood vents. Properly installed and situated flood vents can pay for themselves very quickly. They allow you to save in two ways. The annual reduction on your flood insurance premiums can be considerable. Secondly, should floodwaters rise to your home, flood vents can reduce the risk of structural damage, which can be very costly to repair.

When you are ready to purchase flood vents do not be fooled by any fancy sales talk! A flood vent is just a covering for a hole or opening in the foundation wall. There are many different flood vents in the market. Some open and close automatically, some stay open, some have vermin screens, some are easier to install than others, some are very expensive, and some are made of stainless steel, some plastic and some wood. The right flood vent for your home is determined by weather conditions, ventilation requirements, durability, critter control, ease of installation and affordability.

There are two types of flood vents on the market: non-engineered and engineered. Engineered vents have been designed in such a way that they provide a more efficient flood relief system, and thus fewer vents will need to be installed.

The opening size of the non-engineered flood vent is calculated by multiplying the width times the height of the opening. The opening size of the engineered flood vent is calculated using a mathematical formula that takes into account certain coefficients, net area and opening shapes. This formula calculation must be certified by a professional engineer. The main difference between the two types of flood vents is that fewer of the engineered flood vents are required to meet NFIP requirements. For example, a non-engineered 8" x 16" vent is rated at 128 square inches while an engineered 8" x 16" is rated at 230 square inches.

In a Nutshell: Numbers to Remember

FEMA's flood insurance requirements boil down to this:

1 - One square inch of opening in a foundation wall per square foot of house.

2 - Vents must be less than 12 inches above the ground.

3 - Two vents per enclosed area, on different exterior walls.

Your flood vent selection boils down to this:

1 - Weather conditions and ventilation requirements.

2 - Critter control requirements.

3 - Flood vent durability and ease of installation.

4 - Affordability!

That's it. Make sure you have the appropriate flood vents installed -- or do it yourself -- then call your flood insurance company to get a reduction in your premiums. You'll also enjoy the peace of mind of knowing that you're not only compliant, you're safer.

This article is not intended to be a substitute for FEMA's comprehensive guidelines. For more information, visit www.FEMA.gov.

Related Articles

• Safety Topics In The Workplace
• Okamoto Condoms Things To Know
• The means to Make Your Spouse Love You All Over Again
• Tips on how to Make Your Wife Love You All Over Once more
• Baby Buggy Strollers-Finding the Best Combi Double Stroller

HTML Ready Article. Click on the "Copy" button to copy into your clipboard.

<!DOCTYPE HTML PUBLIC '-//W3C//DTD HTML 4.01 Transitional//EN' 'http://www.w3.org/TR/html4/loose.dtd'><html><head><title>Look For Articles - Articles Directory | Is it smart to use flood vents?</title></head><body><h3>Is it smart to use flood vents?</h3><br><br> By: William Sykes<br><br><p><p>Copyright (c) 2009 William Sykes</P><p>Yes it is Smart to Use Flood Vents!</P><p>Properly positioned and installed flood vents in your home's foundation walls will not only help you protect your investment, they can help you save money. And, despite what you may have heard, the regulations governing their type and placement are easy to understand.</P><p>These regulations were stipulated by the National Flood Insurance Program (NFIP), a program of the Federal Emergency Management Agency (FEMA).</P><p>Requirements: the Basics</P><p>1 - Openings must be installed in foundation walls so that water can flow, unimpeded, in and out of the crawl space without damaging the walls' integrity. The regulation is easy to remember: one square inch of opening in the foundation wall for every square foot of the area of your house. For example, a 2,000-square-foot crawl space would need 2,000 square inches of opening. The number of flood vents you need to install depends on the size and type of vent you buy. (More on that later.) 2 - Each enclosed area must have a minimum of two openings. If there are multiple enclosed areas within the foundation walls, each area must have at least two openings in its exterior walls.</P><p>3 - Flood vents must be below flood level to work. The bottom of each opening must be no more than 1 foot above whichever of these is higher: the interior or exterior grade immediately under the opening.</P><p>4 - Any screens, grates, grilles, fixed louvers, or other covers or devices you install must not block or hinder the automatic flow of floodwaters into and out of the enclosed area.</P><p>The purpose of flood vents (also called "flood gates" or "flood ports") is to reduce structural damage from flooding. These permanent openings accomplish this objective by allowing water to pass into or out of a building's exterior foundation walls.</P><p>In a flood situation, if the water pressure inside and outside your home can't equalize rapidly enough, the windows and doors could blow out. In addition, this pressure can compromise the foundation and make your home unsafe to live in. Studies have shown that houses with proper openings survive a flood; homes without such openings collapse.</P><p>According to its website, the NFIP "requires flood vents for residential basements, crawl spaces, garages, and other enclosed structures that are below the Base Flood Elevation (BFE) in Special Flood Hazard Areas." BFE is the height of the base flood, usually in feet, in relation to the National Geodetic Vertical Datum of 1929 or other datum as specified.</P><p>When a Community participates in the NFIP every property owner in the community must follow all of the code requirements whether or not the property owner purchases flood insurance. One of the code requirements is properly installed flood vents. Properly installed and situated flood vents can pay for themselves very quickly. They allow you to save in two ways. The annual reduction on your flood insurance premiums can be considerable. Secondly, should floodwaters rise to your home, flood vents can reduce the risk of structural damage, which can be very costly to repair.</P><p>When you are ready to purchase flood vents do not be fooled by any fancy sales talk! A flood vent is just a covering for a hole or opening in the foundation wall. There are many different flood vents in the market. Some open and close automatically, some stay open, some have vermin screens, some are easier to install than others, some are very expensive, and some are made of stainless steel, some plastic and some wood. The right flood vent for your home is determined by weather conditions, ventilation requirements, durability, critter control, ease of installation and affordability.</P><p>There are two types of flood vents on the market: non-engineered and engineered. Engineered vents have been designed in such a way that they provide a more efficient flood relief system, and thus fewer vents will need to be installed.</P><p>The opening size of the non-engineered flood vent is calculated by multiplying the width times the height of the opening. The opening size of the engineered flood vent is calculated using a mathematical formula that takes into account certain coefficients, net area and opening shapes. This formula calculation must be certified by a professional engineer. The main difference between the two types of flood vents is that fewer of the engineered flood vents are required to meet NFIP requirements. For example, a non-engineered 8" x 16" vent is rated at 128 square inches while an engineered 8" x 16" is rated at 230 square inches.</P><p>In a Nutshell: Numbers to Remember</P><p>FEMA's flood insurance requirements boil down to this:</P><p>1 - One square inch of opening in a foundation wall per square foot of house.</P><p>2 - Vents must be less than 12 inches above the ground.</P><p>3 - Two vents per enclosed area, on different exterior walls.</P><p>Your flood vent selection boils down to this:</P><p>1 - Weather conditions and ventilation requirements.</P><p>2 - Critter control requirements.</P><p>3 - Flood vent durability and ease of installation.</P><p>4 - Affordability!</P><p>That's it. Make sure you have the appropriate flood vents installed -- or do it yourself -- then call your flood insurance company to get a reduction in your premiums. You'll also enjoy the peace of mind of knowing that you're not only compliant, you're safer.</P><p>This article is not intended to be a substitute for FEMA's comprehensive guidelines. For more information, visit <A href="http://www.fema.gov/">www.FEMA.gov</A>.<br></P></p> <br><br> <b>Author Resource:-></b>  William G. Sykes is an inventor, product designer, member of the International Code Council, engineer and patent attorney. He specializes in crawlspace and foundation protection products for flood protection, ventilation and encapsulation (flood/air vents, doors and fans). Learn more about crawlspace and foundation protection and how to save money on your flood insurance premiums by visiting our website =><br><A href="http://www.crawlspacedoors.com/">http://WWW.crawlspacedoors.com</A><br><br><br><b>Article From</b> <a href='http://www.look4articles.com/'>Look For Articles - Articles Directory</a><br></body></html>