For all of us that like quickpwn but desire a GUI, there is 1 now. Through the those which aren't intending to restore. Quickpwn now activates and unlocks a 2g it's the same the best all-in-one solution.
Step 0: The guide assumes that you are by now managing the firmware in your iPhone that you want to jailbreak. In order to upgrade in iTunes 1st, please examine my upgrade guide. You can find vital info right here in connection with update method and the ways to get a content back quickly.
Step 1: Download quickpwn using this website link (as a result of theiphoneproject.org) and extract it. Because of this tutorial, we'll use c:quickpwn. If you are unlocking a 2g, obtain bootloaders 3.9 and 4.6 and place them inside the very same folder.
Stage 2: Load iTunes and be sure it sees your cellphone. Go away iTunes operating and never touch it again. For 2.1 & 2.2, you will want iTunes 8 installed. You can get it and any iTunes version right here.
Step 3: Down load the correct firmware image (see firmwares page for firmware that you picked). Save this image inside exact same folder together with the quickpwn.exe file. For your example we'll use c:quickpwn. Your folder need to now look like this (with the updated quickpwn exe and proper firmware there):
Step 4: Launch quickpwn GUI.
Stage 5: Select your oral appliance hit the arrow at the bottom of your window.
Step 6: Click Browse
Arrive at your c:quickpwn folder and select your firmware.
It has to tell you this when you find yourself done:
Click the Blue arrow
Step 7: In the next screen, you are prompted to settle on Cydia and Installer. They are both selected automagically. You will need to select Cydia or your jailbreak might be useless. Installer is not an alternative to Cydia, is just not ready, and it has hardly any packages. Furthermore, there may be still a big buglist in installer. In brief, choose Cydia. This shouldn't be an option. Select Cydia. Select installer if you need to but don't forget Cydia. Note, you can even select to replace your bootlogos right here should you want.
If you are not unlocking, skip to action 8.
Phase 7a: Unlocking only - If you are unlocking your 2g, select "unlock" because well. Should you be by now unlocked and simply desire to activate, still select "unlock" right here. (For understanding of unlock vs activate, look at this).
Phase 7b: Unlocking only - Select your bootloaders that you simply downloaded in phase #1.
Stage 8: Click "Go"
Action 9: The app will put your device into recovery mode. Next, you are going to follow onscreen instructions to input DFU mode. Just follow along. It will have a series of button presses at certain times.
Don't take the iphone off the PC connection! Should you choose, you must begin again.
Note: For anyone who is being asked "Is your iPhone/iPod plugged into your computer via USB" for the reason that you did not load iTunes and give it time to visit your telephone before beginning. Here it's too late and you also has to start start back again at phase 8.
Whenever you get into the DFU mode, quickpwn just begins and finishes up.
Wait slightly with the approach to conclude, so when your device reboots, congratulations! That you are done.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")