Surfboard fins are important to the surfing system, and there are a lot of types that you can choose from. Choosing the right fin for your surfboard is a crucial decision to make, for the reason that surf fins have their own characteristics that should be taken into consideration.In addition the brand of the fin that you will choose has important effects on the performance of your surfboard. If you want to check online for some of the best fins there is for your surfboard, visit waterboyz.com .
The surfboards these days have removable fins whereas at one time they were fixated.You need to be sure that the surf fin is compatible with the cross boxes . Boxes are the specific device that hold the fin in its place on the surfboard. That is why it is very important to correctly choose the system that you want.
The first priority that you ought to consider is the fins’ characteristics, such as the depth, template, base, foil, rake, tip and flex.
FLEX
Those fins that are stiff are a lot faster, but fins that are flexible are a lot easier to turn.
TIP
The tip is the top third of your fin, if there are a lot of tips there, then it means that it has more hold.
RAKE
The rake is the distance that is in between the fin tip and the trailing edge that is of the fins’ base. This is the one that has the swept back feature of the fin. If you will increase the rake, then you will get an increased rate of traction.
FOIL
The foil is the fins’ horizontal curve; this is measured from the fins’ front edge to the trailing edge.
BASE
The base is the fins’ length where it is joined at the surfboard. If you will increase the length, then this will add to the forward drive, but it will make it a bit hard to make a turn. There are the shortboard tri fins which more often has a three and five up to four and five inch base, and also the Longboard single fins’ that are about six inches.
TEMPLATE
The template is the fins’ outline.
DEPTH
To be able to get the fins’ maximum height it has to measure from the surfboard’s bottom surface. This will show just how far the fin will go in the water. The surfboard’s hold will be increased with the depth the fin can go as far, but it will make it harder to turn too. Three up to four inch depth is the standard expected depth on a tri fin and for the longboard that has single fins’, most likely the depth that is expected is about nine inches.
Well known companies such as Future, FCS, BIC, Center, Proteck, Dockslocks, Rainbow, Wingnut and Johnny Rice all produce great fins and you can find them on line at places such as waterboyz.com for example.
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")