The numerous kinds of candle making molds available to purchase for home candle making are almost as numerous as the candles you can get. It is logical to imagine that with a well-liked interest such as candle making along with the substantial amount of people getting candles to use at home, that there would be loads of diverse kinds of candle making molds to buy.
Essentially candle molds are only containers used to hold poured wax as it cools. Once the wax has cooled entirely it will maintain the molds appearance and can be carefully removed.
Candle molds are made from a range of materials and come in different shapes and dimensions. All these variations allow them to offer a range of distinct uses, aluminium molds for example are a common sort of mold that candle makers use as they are especially strong and heat resistant. They also have the advantage of giving the finished candle a smooth finish as they do not leave any seams, this provides the appearance that the candle has been professionally made.
These kinds of metallic molds are commonly used in making pillar and votive candles. When compared with rubber molds though, they are relatively inexpensive and are also very straightforward to clean. Put them upside down on an oven baking sheet next heat the oven to just about 150 degrees, this lets any extra wax to melt and run from the mold and onto the baking sheet. However a weakness of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another disadvantage is that to remove the completed candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are extremely flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and regrettably can have a strong odour that may pollute your candle. Yet again a releasing agent maybe necessary to aid withdrawing the candle from the mold. Taper and pillar candles are generally created from polyurethane molds. Silicone molds, owing to their superior qualities are almost certainly the most expensive; they are flexible and are able to stretch to a point, making it a lot simpler to remove the candle from the mold without the use of a releasing agent.
The use of latex molds appears to be losing its attraction lately because of the developments and advancements being created with the other kinds of rubber molds. In spite of this, the use of latex has the distinct advantage of permitting you to fashion your own stunning mold designs. Using liquid latex it is possible; by means of painting repeated layers of the latex on an object you can create an endless quantity of exclusive molds.
The most economical type of mold is manufactured of plastic because it can be very simply mass produced, though because they tend to be brittle they can have a short lifespan. Having said that, you will discover plastic molds are fairly straightforward to clean with a little hot soapy water. Make confident the mold is totally dry prior to using it over again as water bubble marks could materialize on the surface of the candles. They are brilliant for novices to use because of their availability and low cost, but as you develop in your hobby the additional forms of mold mentioned will grant your candle making more of a professional edge.
Author Resource:
If you would enjoy any further general guidelines on how to choose the best candle making molds or if you would like further guidelines on candle making then please call in at my web site www.swankeecandles.blogspot.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")