The assorted sorts of candle making molds available to buy for home candle creating are practically as numerous as the candles you can get. It is logical to picture that with a well-liked activity such as candle making along with the substantial amount of people getting candles to use at home, that there would be lots of different kinds of candle making molds to buy.
Essentially candle molds are simply containers used to hold poured candle making wax as it cools. Once the wax has cooled completely it will keep the molds shape and can be warily removed.
Candle molds are manufactured from a range of materials and come in a variety of shapes and sizes. All these variations allow them to offer a range of distinctive uses, aluminium molds for instance are a widespread variety of mold that candle makers use since they are extremely robust and heat resistant. They also have the benefit of giving the finished candle a smooth finish as they don't leave any seams, this offers the look that the candle has been professionally made.
These kinds of metallic molds are usually used in creating pillar and votive candles. When compared with rubber molds though, they are somewhat inexpensive and are also very painless to clean. Place them upside down on an oven baking sheet next heat the oven to about 150 degrees, this lets any extra wax to melt and run from the mold and onto the baking sheet. But a weakness of aluminium molds is their rigid inflexibility they offer little choice in varying the shapes and textures of candles. Another weakness is that to withdraw the finished candle from the mold you will most likely have to use a releasing agent.
Rubber molds such as latex, silicone and polyurethane though are especially flexible. Silicone molds tend to be more expensive than polyurethane and even though molds made from polyurethane are flexible they don't stretch well and unfortunately can have a strong odour that may pollute your candle. Yet again a releasing agent maybe required to help withdrawing the candle from the mold. Taper and pillar candles are regularly created from polyurethane molds. Silicone molds, owing to their superior qualities are almost certainly the most expensive; they are supple and are able to stretch to a point, making it a lot simplier and easier to withdraw the candle from the mold without the use of a releasing agent.
The use of latex molds looks to be losing its reputation lately because of the developments and advancements being made with the other varieties of rubber molds. However, the use of latex has the distinct advantage of allowing you to fashion your own stunning mold designs. Using liquid latex it is possible; by painting repeated layers of the latex on an object you can form an endless amount of exclusive molds.
The most inexpensive type of mold is made of plastic as it can be very easily mass produced, though because they tend to be brittle they can have a short lifespan. Having said that, you will find plastic molds are pretty easy to clean with a little hot soapy water. Make confident the mold is entirely dry before using it again as water bubble marks may develop on the surface of the candles. They are outstanding for novices to use because of their availability and low cost, but as you make progress in your hobby the additional forms of mold described will offer your candle creating more of a practiced edge.
Candles Pictures
Author Resource:
If you would like any new general guidelines on how to choose the best candle making molds or if you would prefer further information on candle making then please call in at my web site www.swankeecandles.blogspot.com
![[Valid RSS feed]](http://www.look4articles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
![[Valid RSS feed]](http://www.look4articles.com/images/rss.jpg "XML Feed For RSS")